3 Red Rings Of Death Fix Tips

If your Xbox is showing you the dreaded three red rings of death, you have cause to be greatly concerned. This condition is caused by overheating. Too much heat to the motherboard causes it to bend or deform. This will loosen the solder connections of the graphics processing unit to the motherboard. The loose GPU is what triggers the three red trouble shooting lights.

If you want try the 3 red rings of death fix on the Xbox 360 console yourself, there are some easy fixes for you to try. The bad news is over 10 million Xbox 360 consoles have already been identified with a design flaw that could create a general hardware failure. Any time a red light turns on it is telling you that something is wrong with the Xbox 360 gaming console.

One red light indicates that your console has some hardware problem and you need to do some action for repairing it. Two red lights indicate that your machine is getting overheated. You need to put it off and relocate it and preferably keep your console at an open place. Three red lights or three 3 red rings of light indicate that your console has red rings of death and you need to take action to rectify the problem. If you are getting four red lights, your cable is probably damaged and therefore need to check and if required replace the cable.

If you want your 3 red rings of death fixed and your warranty has expired, you would probably have to try and fix it yourself or send the console straight to Microsoft. If you decide to have red ring death fixed using Microsoft, you will have to send your console to Microsoft and also send them $140.00 dollars as well. The bad part about having Microsoft fix your console is the fact that you will end up waiting well over a month to get it back.

Another option is for you to lean how to repair the 3 red circles of death-doom yourself, without the need for specialized technicians. Do-it-yourself (DIY) guides are widely available at reasonable prices and can teach you how to repair the red ring of death in about 90 minutes. The steps are simple. Take the case off and remove the x clamp. Remove the heat sink by unscrewing it, and clean the CPU and GPU. Add some thermal compound to the GPU. When you screw the heat sink back in, put a nylon washer above and below the sink. Finally, put the case back on.

Further the advantages of DIY guide is that this is easy to learn. Further you can repair your console whenever you get a hardware related problem and need not send your gaming console to Microsoft in future for fixing red light of death. Home repairs are safe and easy, and these guides show you everything you need to do to, step by step, to fix red lights.

If your Xbox is displaying the dreaded three red rings of death, you have great cause for concern. This condition is caused by overheating. Too much heat to the motherboard causes it to bend or deform. The deformation loosens the solder connections of the graphics processing unit to the motherboard. The loose GPU triggers the three 3 red rings of light. There are several easy approaches to accomplishing a 3 red rings of death fix. By following the instructions in a guide, you can fix the 3 red circles of death - doom in about an hour and a half.

- david shell